Tag Archives: Plumber Trade Schools near me Greenville AL 36037

Find Plumbing Schools near me in Greenville AL 36037

How to Become a Plumber near Greenville Alabama

Greenville AL plumber installing faucetThe initial step to becoming a plumbing tradesman or contractor is enrolling in a plumbing school near Greenville AL. But with so many technical schools to select from, just how do you undertake making sure that you enroll in the right one? Particularly because there are a number of points to examine. For instance, some prospective students will begin by searching for schools that are close to their residence. Once they have identified a few that are within driving distance, they will decide on the one with the lowest tuition. Although cost and location are significant, they are not the sole qualifications that need to be considered. Also critical are the accreditation and reputations of the schools, in addition to their graduation and job placement rates. These and other qualifications should contribute toward your final decision when picking a plumber trade school. We will address that checklist in more detail later in this post. But to begin with, let’s talk a little bit about becoming a plumber and the educational choices that are accessible.

Becoming a Plumber in Greenville AL

Greenville AL plumber repairing water mainAlmost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Greenville AL plumber will typically advance through three phases during their professional career.

  • Apprentice. The majority of Greenville AL plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
  • Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
  • Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Greenville AL is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumbing Certificate and Degree Programs

There are several educational options available near Greenville AL to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Points to Ask Plumbing Trade Schools

Greenville AL plumbing school graduate with sinkNow that you have decided to obtain a diploma, certificate or degree, you can begin to refine your school options. Since there are numerous plumbing trade and vocational schools in the Greenville AL area, it’s essential to have a checklist of qualifications that each school must satisfy. The initial 2 that we mentioned were location and the cost of tuition. And even though both qualifiers may be important when making your determination, there are additional factors that must be considered as well. Following is a checklist of those additional qualifiers that you will need to analyze prior to selecting a plumber tech school.

Is the Plumbing School Accredited?  Numerous plumbing technical schools have attained either a regional or a national accreditation. They may earn Institutional Accreditation, which involves the school’s programs overall, or Programmatic Accreditation, which relates to an individual program, such as electrical technology. Make sure that the Greenville AL program and school are accredited by a U.S. Department of Education acknowledged accrediting organization, for example the Accreditation Board for Engineering and Technology. Along with helping guarantee that you get a quality education, it may help in acquiring financial aid or student loans, which are frequently unavailable for non-accredited schools. Also, a number of states require that the plumbing training course be accredited for it to qualify for certification or licensing.

Is the Plumbing School Licensed?  In addition to accreditation, an additional way of confirming that a trade school you’re reiewing is reputable is by making sure that it’s properly licensed.  Licensing is usually regulated and controlled by state agencies, such as the Alabama Department of Education.  If you don’t know, ask the school which state agency is responsible for its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Greenville AL schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are reviewing what their completion rates are. The completion rate is the percentage or portion of students who enroll in and finish the program. A low completion rate might signify that students were dissatisfied with the program and dropped out. It might also indicate that the teachers were not qualified to train the students. It’s also important that the schools have higher job placement rates. Older and/or more reputable schools may have a broader list of alumni, which may produce more contacts for the school to employ for their apprenticeship and job placement programs. A high job placement rate can not only validate that the school has an excellent reputation within the trade, but additionally that it has the network of contacts to assist students acquire apprenticeships or employment in the Greenville AL area.

Are Apprenticeship Programs Sponsored?  A large number of plumber technical programs are taught in conjunction with an apprenticeship or an internship program. Those participating trade and technical programs will help place you in an apprenticeship program inside their network of plumbing contractors or trade unions. Check if the schools you are reviewing have working partnerships with local Greenville AL plumbers or plumbing specialists. An apprenticeship not only offers a rewarding experience by supplying hands-on training, but it also supplies job opportunities and helps to establish relationships in the regional plumbing professional community.

Are there Modern Facilities?  Make sure that the campus facilities and the equipment that you will be trained on are state-of-the-art and what you will be using in the field. If you are already in an internship or an apprenticeship, check with the master plumber you are working with concerning what you should be looking for. If not, ask a local Greenville AL plumbing company if they can give you some tips.

Where is the School Located?  Unless you are willing to relocate, the school needs to be within driving distance of your Greenville AL residence. Remember that if you decide to attend an out-of-state school, in addition to relocation costs there may be higher tuition fees compared to in-state residents.

Are there Smaller Classes?  It’s desirable that you get as much one-on-one instruction as possible, which can be challenging in bigger classes. Ask if you can sit in on some of the classes so that you can observe how big they are and experience the interaction between teachers and students. Talk to some of the students and get their comments regarding class sizes and instruction. Finally, speak with a few of the instructors and learn what their level of experience is in Greenville AL and what certifications or degrees they hold.

Is the Class Schedule Convenient?  Verify that the class schedules for the schools you are reviewing are flexible enough to meet your needs. If you are only able to attend classes in the evening or on weekends near Greenville AL, check that the programs you are looking at provide those options. If you can only attend on a part-time basis, make sure that the school you select permits part-time enrollment. Additionally, ask what the protocol is to make-up classes should you miss any due to work, illness or family responsibilities.

Considering Plumbing School near Greenville AL?

If you are considering enrolling in and attending a plumber training school near Greenville AL and are unfamiliar with the area, following is some interesting and useful background information regarding the location of your future school campus.

Greenville, Alabama

Greenville is a city in Butler County, Alabama, United States. At the 2010 census, the population was 8,135.[3] The city is the county seat of Butler County and is known as the Camellia City. The movement to change the official Alabama state flower from the goldenrod to the camellia originated in Greenville with legislative sponsors LaMont Glass and H.B. Taylor.[4]

Greenville was first settled in 1819. Its original name was Buttsville,[5] but after becoming the county seat in 1822, its name was changed to Greenville, in remembrance of the former locale in South Carolina of many of the original settlers.[6][7] The first county seat was at Fort Dale, a fortification that was named for Sam Dale, who fought to defend the area during the Creek War. The site of Fort Dale lies on the north of the city near the Fort Dale Cemetery, along what is now Alabama Highway 185.

The namesake of the county, Captain William Butler, was killed during the Creek War. He is buried in the Pioneer Cemetery, which is across from the oldest church in Butler County, the First United Methodist Church of Greenville.

The location could not be found.

Find the Ideal Plumber Technical School near Greenville AL

plumbing tools of the trade in Greenville ALPicking the best plumber training program will probably be the most critical decision you will make to start your new profession. As we have discussed in this article, there are many factors that you will need to assess and compare between the schools you are reviewing. It’s a must that any plumbing tech school that you are considering includes a lot of hands-on instruction. Classes should be smaller in size and each student must have their personal equipment to train with. Classroom teaching needs to offer a real-world perspective, and the course of study should be up-to-date and in-line with industry standards. Programs differ in duration and the kind of credential provided, so you will need to decide what length of program and degree or certificate will best serve your needs. Every training program offers unique options for certification also. Perhaps the best means to research your short list of schools is to visit each campus and speak with the faculty and students. Invest some time to attend some classes. Inspect the campus and facilities. Make sure that you are confident that the program you choose is the best one for you. With the proper training, effort and commitment, you can become a professional plumber in Greenville AL.

Other Top Cities in Alabama

  • Find Plumbing Schools near me in Graysville AL 35073
  • Find Plumbing Schools near me in New Brockton AL 36351
  • Find Plumbing Schools near me in Sylacauga AL 35150
  • Find Plumbing Schools near me in Fayette AL 35555
  • Find Plumbing Schools near me in Spanish Fort AL 36527
  • Find Plumbing Schools near me in Theodore AL 36582
  • Find Plumbing Schools near me in Alexandria AL 36250
  • Find Plumbing Schools near me in Demopolis AL 36732
  • Find Plumbing Schools near me in Linden AL 36748
  • Find Plumbing Schools near me in Headland AL 36345
  •  

     

    Business Results 1 - 10 of 1

    Cole Plumbing
    1 Reviews
    Plumbing, Hydro-jetting, Water Heater Installation/Repair
    Phone:
    1142 Coliseum Blvd, Montgomery, AL 36110