Tag Archives: Plumber Trade Schools near me Atmore AL 36502

Find Plumbing Schools near me in Atmore AL 36502

How to Become a Plumber near Atmore Alabama

Atmore AL plumber installing faucetThe first step to becoming a plumbing contractor or tradesman is locating a plumbing school near Atmore AL. But with numerous technical schools to select from, just how do you approach making certain that you enroll in the best one? Particularly since there are so many factors to evaluate. For example, some potential students will commence by searching for schools that are nearby their residence. After they have located a few that are within commuting distance, they will select the one with the cheapest tuition. While cost and location are important, they are not the only qualifications that must be considered. Also critical are the accreditation and reputations of the schools, along with their job placement and graduation rates. These and additional qualifiers should contribute toward your ultimate decision when selecting a plumber trade school. We will talk about that checklist in more detail later in this post. But first, let’s review a little bit about becoming a plumber and the instructional choices that are available.

Becoming a Plumber in Atmore AL

Atmore AL plumber repairing water mainAlmost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Atmore AL plumber will typically advance through three phases during their professional career.

  • Apprentice. The majority of Atmore AL plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
  • Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
  • Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Atmore AL is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumbing Certificate and Degree Programs

There are several educational options available near Atmore AL to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Topics to Ask Plumbing Vocational Schools

Atmore AL plumbing school graduate with sinkWhen you have made a decision to earn a certificate, diploma or degree, you can begin to narrow down your training options. Considering that there are so many plumbing vocational and trade schools in the Atmore AL region, it’s imperative to have a checklist of qualifications that each school must meet. The first 2 that we talked about were location and tuition expense. And while both qualifiers may be crucial when making your determination, there are additional factors that need to be taken into account also. Following is a checklist of those additional qualifiers that you will need to research prior to enrolling in a plumber trade school.

Is the Plumbing School Accredited?  A large number of plumbing technical programs have earned either a regional or a national accreditation. They can earn Institutional Accreditation, which focuses on the school’s programs overall, or Programmatic Accreditation, which relates to a specific program, such as electrical technology. Make certain that the Atmore AL program is accredited by a U.S. Department of Education recognized accrediting agency, which includes the Accreditation Board for Engineering and Technology. Along with helping make certain that you acquire a quality education, it may help in obtaining financial assistance or student loans, which are in many cases not available for non-accredited programs. Also, many states require that the plumbing training program be accredited for it to be approved for licensing or certification.

Is the Plumbing School Licensed?  In addition to accreditation, an additional way of confirming that a trade school you’re reiewing is reputable is by making sure that it’s properly licensed.  Licensing is usually controlled and regulated by state agencies, such as the Alabama Department of Education.  If you don’t know, ask the school which state agency regulates its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Atmore AL schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are looking at what their completion rates are. The completion rate is the portion or percentage of students who enroll in and finish the course. A low completion rate could signify that students were dissatisfied with the program and dropped out. It might also suggest that the instructors were not qualified to instruct the students. It’s also important that the schools have high job placement rates. Older and/or more reputable schools may have a more extensive list of alumni, which can produce more contacts for the school to employ for their apprenticeship and job placement programs. A high job placement rate can not only affirm that the school has a good reputation within the trade, but also that it has the network of contacts to help grads acquire apprenticeships or jobs in the Atmore AL area.

Are Apprenticeship Programs Sponsored?  Most plumber vocational programs are taught along with an apprenticeship or an internship program. Those participating technical and vocational programs will help place you in an apprenticeship program inside their network of plumbing contractors or trade unions. Ask if the schools you are considering have referring partnerships with local Atmore AL plumbers or plumbing companies. An apprenticeship not only provides a rewarding experience by supplying practical training, but it also provides employment opportunities and helps to establish relationships in the regional plumbing professional community.

Are there Modern Facilities?  Make sure that the school facilities and the equipment that you will be instructed on are state-of-the-art and what you will be working with on the job. If you are presently in an internship or an apprenticeship, talk to the master plumber you are working with regarding what you should be looking for. If not, ask a local Atmore AL plumbing company if they can give you some pointers.

Where is the School Located?  Unless you are willing to move, the school needs to be within commuting distance of your Atmore AL home. Remember that if you decide to attend an out-of-state school, besides the added relocation costs there can be higher tuition charges compared to in-state residents.

Are there Smaller Classes?  It’s important that you get as much personalized instruction as possible, which can be difficult in bigger classes. Ask if you can sit in on a couple of the classes so that you can observe how large they are and experience the interaction between students and instructors. Speak to some of the students and get their opinions concerning class sizes and instruction. Last, speak to some of the instructors and learn what their level of experience is in Atmore AL and what degrees or certifications they hold.

Is the Class Schedule Convenient?  Make sure that the class schedules for the schools you are assessing are flexible enough to handle your needs. If you can only go to classes at night or on weekends near Atmore AL, check that the programs you are considering provide those choices. If you can only attend on a part-time basis, make sure that the school you select permits part-time enrollment. Additionally, ask what the protocol is to make-up classes should you miss any because of work, sickness or family responsibilities.

Considering Plumbing School near Atmore AL?

If you are considering enrolling in and attending a plumber training school near Atmore AL and are unfamiliar with the area, following is some interesting and useful background information regarding the location of your future school campus.

Atmore, Alabama

Atmore is a city in Escambia County, Alabama, United States. It incorporated in 1907.[3] As of the 2010 census it had a population of 10,194,[4] with an estimated population of 10,006 in 2014.[5] Atmore is in the planning stages to increase its economic base with additions in its new Rivercane development along the I-65 corridor.

Atmore has completed requirements to be recognized as an Alabama Community of Excellence at the upcoming Alabama League of Municipalities Convention. City officials are also working with the Alabama Historical Commission to have the downtown district listed on the National Register of Historic Places.[6]

Atmore is located in western Escambia County at 31°1′23″N 87°29′31″W / 31.02306°N 87.49194°W / 31.02306; -87.49194 (31.023183, -87.492067).[7] Its southern border is the Florida state line. The center of town is at the intersection of U.S. Route 31 and Alabama State Route 21, while a new section of the city has been incorporated 6 miles (10 km) to the north around Exit 57 of Interstate 65. US 31 leads southwest 20 miles (32 km) to Bay Minette and east 28 miles (45 km) to Brewton. Mobile is 51 miles (82 km) to the southwest via US 31 and I-65, while Pensacola, Florida, is 49 miles (79 km) south via AL 21, Florida State Road 97, and U.S. Route 29.

The location could not be found.

Select the Ideal Plumbing Technical School near Atmore AL

plumbing tools of the trade in Atmore ALSelecting the ideal plumbing training program will probably be the most important decision you will make to start your new career. As we have addressed in this article, there are many things that you will need to examine and compare among the training programs you are looking at. It’s a prerequisite that any plumber tech school that you are evaluating includes a good deal of hands-on training. Classes need to be small in size and every student should have their own equipment to train with. Classroom education needs to offer a real-world perspective, and the training program should be current and in-line with industry standards. Programs vary in duration and the kind of credential offered, so you will have to determine what length of program and degree or certificate will best fulfill your needs. Each training program offers unique possibilities for certification as well. Probably the best approach to research your final list of schools is to visit each campus and talk with the teachers and students. Take the time to monitor some classes. Tour the campus and facilities. Make certain that you are confident that the training program you pick is the best one for you. With the proper training, effort and dedication, you can become a professional plumber in Atmore AL.

Other Top Cities in Alabama

  • Find Plumbing Schools near me in Ashland AL 36251
  • Find Plumbing Schools near me in Hamilton AL 35570
  • Find Plumbing Schools near me in Newville AL 36353
  • Find Plumbing Schools near me in Arlington AL 36722
  • Find Plumbing Schools near me in Greensboro AL 36744
  • Find Plumbing Schools near me in Fairfield AL 35064
  • Find Plumbing Schools near me in Enterprise AL 36330
  • Find Plumbing Schools near me in Demopolis AL 36732
  • Find Plumbing Schools near me in Sulligent AL 35586
  • Find Plumbing Schools near me in Orange Beach AL 36561
  •  

     

    Business Results 1 - 10 of 5

    Kelson Plumbing
    3 Reviews
    Plumbing, Water Heater Installation/Repair, Appliances & Repair
    Phone:
    Cantonment, FL 32533

    bluefrog Plumbing + Drain of Mobile
    2 Reviews
    Plumbing
    Phone:
    2001 US Hwy 98, Ste B, Daphne, AL 36526

    Roto-Rooter
    5 Reviews
    Plumbing, Water Heater Installation/Repair, Septic Services
    Phone:
    2001 W I65 Service Rd N, Mobile, AL 36618

    TLT Plumbing & Repair
    1 Reviews
    Plumbing
    Phone:
    Robertsdale, AL 36567

    Anytime Plumber
    3 Reviews
    Plumbing
    Phone:
    175 W Airport Blvd, Pensacola, FL 32505